螺旋輸送機

Phone：: 07352831789

Introduce:

　　LS旋輸送機是一種不帶撓性牽引件的輸送裝置，螺旋輸送機俗稱絞龍，是礦產、飼料、糧油、建筑業中用途較廣的一種輸送設備，它適用于顆粒、粉狀和小塊狀物料的水平輸送，傾斜輸送，垂直輸送等形式，其輸送距離從 2 米到 70 米，規格多種，并可根據客戶需求制作。用途：能規則地控制和連續輸送粉狀和小塊狀物料，如糧食、飼料、煤粉、水泥、熟料、復混肥、砂、谷類、煤塊、石子等。其結構簡單新穎、維修方便、技術指標先進、橫截面尺寸小，密封性能好，操作安全方便，便于中間裝、卸料；中間吊軸承采用滾動式或滑動式兩種結構，均設防塵、密封裝置，操作維修方便。
　　LS screw conveyer is a kind of transportation device which does not bring flexible pull part .It is known as packing auger Screw conveyor is a widely used in mineral, animal feed, grain and oil, and construction industry transportation, it applies to horizontal ,tilt, and vertical transportation of particles, powder and small block materials, and other forms of transport, the transport distance from 2 meters to 70 meters and having many specifications. It can be produced according to customer’demands. Purpose: to control orderly and transport continually of powder and small block materials, such as food, feed, coal, cement, clinker, fertilizer, sand, grain, coal, gravel and so on.. Its structure is novel and simple. It is easy to maintain and have advanced technical indicators, a small size of cross-sectional, good sealability. It is safe and convenient to operate and easy to load and discharge in the middle; the middle suspension bearing have two structure -rolling bearings or slip. It is equipped with dust-proof, sealed device, and easy to operate and maintain.
　　主要型號及技術參數:
　　MAIN MODELS AND TECHNICAL PARAMETERS:

規格型號Model and specification		LS100	LS160	LS200	LS250	LS315	LS400	LS500	LS630	LS800	LS1000	LS1250
螺旋直徑Screw diameter(mm)		100	160	200	250	315	400	500	630	800	1000	1250
螺距Thread pitch(mm)		100	160	200	250	315	355	400	450	500	560	630
技術參數Technical parameter	n	140	112	100	90	80	71	63	50	40	32	25
	Q	2.2	8	14	24	34	64	100	145	208	300	388
	n	112	90	80	71	63	56	50	40	32	25	20
	Q	1.7	7	12	20	26	52	80	116	165	230	320
	n	90	71	63	56	50	45	40	32	25	20	16
	Q	1.4	6	10	16	21	41	64	94	130	180	260
	n	71	50	50	45	40	36	32	25	20	16	13
	Q	1.1	4	7	13	16	34	52	80	110	150	200

　　注:n-轉速,r/min(偏差允許在10%范圍內);Q-輸送量,m3/h;表中Q值的填充系數為0.33.
　　GX螺旋輸送機的結構型式與LS型螺旋輸送機基本相同。
　　GX型螺旋輸送機的螺旋直徑有150、200、250、300、400、500、600mm七種，機長3-70m，可在環境溫度為-20--50℃的條件下，以小于20°的傾角單向輸送溫度低于200℃的物料。
　　主要型號及技術參數:
　　MAIN MODELS AND TECHNICAL PARAMETERS:

規格型號Model and specification	GX150	GX200	GX250	GX300	GX400	GX500	GX600
輸送能力Transportation capability(t/h)	9	9	16	22	51	88	135
轉速Rev(r/min)	60	60	60	60	60	60	55

　　注:表中輸送能力按水泥(ρ=1.2t/m3)計算。

07352831789

螺旋輸送機

Introduce: